News

The Canon PRO-1100 printer model has been available since early October 2024. Compared to its predecessor, the PRO-1000, there seems to be little change in terms of hardware. The PF-10 print head has been carried over from the previous model, as has the MC-20 maintenance tank. The number and colors of the inks (12) remain the same. The improvement in print quality, as promoted by the printer manufacturer, is attributed to a new ink formulation. This new ink is housed in cartridges labeled PFI-4100, whereas the PRO-1000 used PFI-1000 cartridges. We continue to use our proven and popular Pigmera C1...

Recommendation for the procedure for refilling PFI-300 original cartridges To use Pigmera C1 ink in an imagePROGRAF PRO-300, the original cartridges can be refilled. It does not matter whether they are the setup cartridges that come with the printer or original cartridges purchased later.. For the filling process and the use of refilled ink cartridges, we recommend the following tools: For filling: Our ink bottle Additional syringe cap Kitchen paper Precision scale or kitchen scale For use: 2 complete sets of original cartridges for replacement Hand counter The orange caps of the original cartridges Since the low ink volume of...

Refilling an original Canon® imagePROGRAF Pro-1000 is not difficult at all An empty original ink cartridge of the Pro-1000 can be easily refilled with Pigmera® C1 ink. Please read the complete instructions before starting! Make sure to use a suitable surface when handling ink! What you need to refill a Pro-1000 ink cartridge:Scale, 60ml syringe with needle, ink, some kitchen paper, an empty ink cartridge. NOTE: The following pictures show the white cap of the ink cartridge removed only for better visibility of the filling process. This is solely for illustration purposes, and the cap does not need to be...

Zurücksetzen des Canon Main­ten­an­ce Kit MC-16 Wer einen Canon Großformat Drucker für den Transport vorbereiten möchte, muß dafür vor dem Transport das Tintenleitungssystem leerpumpen. Dieses Tintenleitungsystem besteht nicht nur aus den Zuleitungen in Form von Schläuchen, sondern das System verfügt über Zwischentanks die es ermöglichen, das während des laufenden Betriebs die Tintenpatronen des Druckers ausgetauscht werden können. Im Handbuch des Druckers finden Sie dazu folgende Hinweise: "Je nach Druckerstatus können bei der Vorbereitung des Druckertransports (d.h. wenn Sie den Druckermenüpunkt zur Hinweis Transportvorbereitung durchführen) Ersatzteile notwendig sein." "Wenn Verbrauchsartikel ausgewechselt werden müssen, erscheint die Meldung "Verbrauchsartikel müssen ausgewechselt werden. Kundendienst...